LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Diagnostic Trouble Codes (DTCS), Symptom Tests And R & I) >> DTC/Circuit Diagnosis >> Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect automatic back door control module connector.
    3. Check continuity between automatic back door control module harness connector and ground.
    Automatic back door control module Ground Continuity
    Connector Terminal
    B26 22 Existed

    Is the inspection result normal?

    YES 

    Replace automatic back door control module. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals