LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Diagnostic Trouble Codes (DTCS), Symptom Tests And R & I) >> DTC/Circuit Diagnosis >> Automatic Back Door Switch >> COMPONENTFUNCTIONCHECK

Automatic Back Door Switch: COMPONENTFUNCTIONCHECK

  1. CHECK FUNCTION

    1. Select "AUTOMATIC BACK DOOR CONTROL UNIT" using CONSULT.
    2. Select "AUTO BD SW" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    AUTO BD SW Automatic back door switch Pressed ON
    Released OFF

    Is the inspection result normal?

    YES 

    Automatic back door switch is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals