LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Diagnostic Trouble Codes (DTCS), Symptom Tests And R & I) >> DTC/Circuit Diagnosis >> Automatic Back Door Close Switch >> Component Inspection

Component Inspection

  1. CHECK AUTOMATIC BACK DOOR CLOSE SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect automatic back door close switch connector.
    3. Check continuity between automatic back door close switch terminals.
    Automatic back door close switch Condition Continuity
    Terminal
    1 2 Automatic back door close switch Pressed Existed
    Released Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace automatic back door close switch.

scientia non olet · About LEMON Manuals