Diagnosis Procedure
- CHECK FUSE
Check for blown fuses.
Power source Fuse No. Battery 5 Battery 8 Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Be sure to eliminate cause of malfunction before installing new fuse.
- CHECK POWER SUPPLY CIRCUIT
Check voltage between BOSE amp. harness connector and ground.
Signal name Connector Terminal Ignition switch position Value (Approx.) Battery power supply B229 10 OFF Battery voltage Battery power supply B229 11 OFF Battery voltage Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Check harness between BOSE amp. and fuse.
- CHECK GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect BOSE amp. connector.
- Check continuity between BOSE amp. harness connector and ground.
Signal name Connector Terminal Ignition switch position Continuity Ground B229 12 OFF Existed
Is the inspection result normal?
YES
INSPECTION END
NO
Repair harness or connector.