DTC Confirmation Procedure

Turn ignition switch OFF, and wait for 10 seconds or more.

GO TO STEP 2. 

CONSULT SELF-DIAGNOSIS

1. Turn ignition switch ON.
2. Perform "SONAR" self-diagnosis.

Is DTC "B2721" detected?

YES ("CENTER SENSOR [RL] SHORT-BAT" is detected.) 

Refer to DIAGNOSIS PROCEDURE .

YES ("CENTER SENSOR [RL] OPEN/SHORT-GND" is detected.) 

Refer to DIAGNOSIS PROCEDURE .

YES ("CENTER SENSOR [RL] SENSOR" is detected.) 

Refer to DIAGNOSIS PROCEDURE .

YES ("CENTER SENSOR [RL] CONFIG ERROR" is detected.) 

Refer to DIAGNOSIS PROCEDURE .

NO 

INSPECTION END