Diagnosis Procedure
- CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect rear auxiliary input jacks connector and video distributor connector.
- Check continuity between rear auxiliary input jacks harness connector and video distributor harness connector.
Rear auxiliary input jacks Video distributor Continuity Connector Terminal Connector Terminal M98 7 M218 40 Existed - Check continuity between rear auxiliary input jacks harness connector and ground.
Rear auxiliary input jacks Ground Continuity Connector Terminal M98 7 Not existed
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Repair harness or connector.
- CHECK AUX IMAGE SIGNAL
- Connect rear auxiliary input jacks connector and video distributor connector.
- Turn ignition switch ON.
- Check signal between rear auxiliary input jacks harness connector and ground.
(+) (-) Condition Reference value Rear auxiliary input jacks Connector Terminal M98 7 Ground At rear AUX image is displayed on headrest display unit.
Is the inspection result normal?
YES
Replace video distributor. Refer to REMOVAL AND INSTALLATION .
NO
Check that there is no malfunction in the external device.