Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Remove the fuel level sensor unit and fuel pump. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 2.

CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Check the resistance between fuel level sensor unit and fuel pump.

Fig 1: Checking Fuel Level Sensor Unit

Courtesy of NISSAN NORTH AMERICA, INC.

Terminals		Condition	Resistance (Ω) (Approx.)	Height [mm (in)]
Fuel level sensor unit and fuel pump
2	5	Full^* (A)	46.0	280.7 (11.05)
		Empty^* (B)	283.0	29.4 (1.157)

* : When float rod is contact with stopper.

Is inspection result OK?

YES

INSPECTION END

Replace fuel level sensor unit and fuel pump. Refer to REMOVAL AND INSTALLATION .