Diagnostic Test
- CHECK TRANSMISSION RANGE SWITCH
Check continuity between transmission range switch connector terminals.
Transmission range switch Condition Continuity Terminal 7 - 10 Manual lever: "P" and "N" positions Existed Other than the above Not existed 4 - 5 Manual lever: "P" position Existed Other than the above Not existed 4 - 8 Manual lever: "R" position Existed Other than the above Not existed 4 - 9 Manual lever: "N position Existed Other than the above Not existed 4 - 2 Manual lever: "D" position Existed Other than the above Not existed Is the inspection result normal?
YES
INSPECTION END
NO
There is a malfunction of transmission range switch. Replace transaxle assembly. Refer to REMOVAL AND INSTALLATION .