LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (Except Hybrid)) >> Unit Disassembly And Assembly >> Ring Gear Shaft >> Inspection >> Inspection After Disassembly >> Bearing

Inspection After Disassembly: Bearing

WARNING: This page is about a different variant/trim than selected.

Check for seizure, peeling, wear, corrosion, sticking, unusual noise, roughness in hand turning, and other damage.

CAUTION:

When replacing the bearing, always replace the inner race and outer race as a pair.