Special Service Tool

WARNING: This page is about a different variant/trim than selected.

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name		Description
ST33061000 (J-8107-2) Drift a: 38 mm (1.50 in) dia. b: 28.5 mm (1.122 in) dia.	Courtesy of NISSAN NORTH AMERICA, INC.	Removing ring gear bearing (left) inner race (transfer case side)
KV381054S0 (J-34286) Puller	Courtesy of NISSAN NORTH AMERICA, INC.	Removing ring gear shaft oil seal
ST3127S000 (J-25765-A) Preload gauge	Courtesy of NISSAN NORTH AMERICA, INC.	Measuring preload torque