LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1210: ECM >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

  1. PERFORM ECM SELF-DIAGNOSIS

    G-20With CONSULT 

    Perform self-diagnosis for "ENGINE".

    Is any DTC detected?

    YES 

    Check the DTC. Refer to DTC INDEX .

    NO 

    GO TO STEP 2  .

  2. CHECK TERMINALS AND HARNESS CONNECTORS

    Check AWD control unit pin terminals for damage or loose connection with harness connector.

    Is inspection result normal?

    YES 

    After turning the ignition switch OFF, perform DTC confirmation procedure again. If DTC "C1210" is detected, Replace AWD control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace error-detected parts.