LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Driver Assistance System (Symptom Diagnosis & Removal And Installation) (DCA) (Except Hybrid)) >> Symptom Diagnosis >> DCA System Not Activated (Switch Is On) >> Description

DCA System Not Activated (Switch Is On): Description

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The dynamic driver assistance switch can be turned ON/OFF, but the DCA system does not operate.

NOTE:

Never start the operation under the following conditions.

No operation condition

  • When the brake pedal depressed
  • When the ICC system is set
  • When the system judges that the vehicle comes to a standstill by the system control
  • When the vehicle ahead is not detected

Operation cancellation condition

  • When the dynamic driver assistance switch is turned to OFF
  • When the system malfunction occurs
  • When ABS or VDC (including the TCS) operates
  • When the VDC is turned OFF
  • When the sensor area of the front bumper is dirty and the measurement of the distance between the vehicles becomes difficult
  • When ABS warning lamp is ON
  • When the SNOW mode switch is turned ON