LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Driver Assistance System (Basic Inspection, Symptom Diagnosis & Removal And Installation) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid)) >> Removal And Installation >> Warning Systems Switch >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
  2. Remove the screws (A, B) that retain the lower switch carrier (2).
    G08857256Courtesy of NISSAN NORTH AMERICA, INC.

    (1): Upper switch carrier

    (2): Lower switch carrier

    (C): Upper switch carrier screws

  3. Release upper (B) and lower (C) pawl using a suitable tool (A), then remove the warning system switch (1) from the lower switch carrier.
    G08857257Courtesy of NISSAN NORTH AMERICA, INC.

    (2): Heated steering wheel switch (if equipped)

    (3): AC 120V outlet main switch (if equipped)

    (4): Head lamp levelizer (if equipped)