Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SEAT BELT BUCKLE SWITCH (DRIVER SEAT)

Turn ignition switch OFF.
Disconnect seat belt buckle switch (driver seat) harness connector.

Check continuity between seat belt buckle switch (driver seat) terminals.

Seat belt buckle switch (driver seat)		Condition	Continuity
Terminal		Condition	Continuity
3	4	Seat belt buckle (driver seat) is fastened	No
	4	Seat belt buckle (driver seat) is not fastened	Yes
	2	Seat belt buckle (driver seat) is fastened	Yes
	2	Seat belt buckle (driver seat) is not fastened	No

Is the inspection result normal?

YES

Inspection End.

Replace seat belt buckle switch (driver seat). Refer to REMOVAL AND INSTALLATION .