LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Seat Belt Control System (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC B2471: SYS Heat PROTC As >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK THE VEHICLE CONDITION WITH CONSULT DATA MONITOR

    1. Check HEAT PROTC RH in DATA MONITOR with CONSULT.
    2. Wait until OFF appears.
    3. Perform the self-diagnosis results with CONSULT, after performing the check.
    4. Touch ERASE.
    5. Perform DTC Confirmation Procedure. Refer to DTC LOGIC .

    Is DTC B2471 displayed again?

    YES 

    GO TO STEP 2  .

    NO 

    Inspection End.

  2. CHECK INTERMITTENT INCIDENT

    Refer to INTERMITTENT INCIDENT .

    Inspection End.

scientia non olet · About LEMON Manuals