LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Seat Belt Control System (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC B2451: Seat BLT MTR Dr CIRC >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. INSPECTION START

    1. Check Self-diagnostic result with CONSULT.
    2. Touch ERASE.
    3. Perform DTC Confirmation Procedure. Refer to DTC LOGIC .

    Is DTC B2451 displayed again?

    YES 

    Replace pre-crash seat belt control unit (driver side). Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK INTERMITTENT INCIDENT

    Refer to INTERMITTENT INCIDENT .

    Inspection End.