LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Automatic Drive Positioner (Except Hybrid)) >> Basic Inspection >> Inspection And Adjustment >> System Setting >> Description >> Setting Change

Setting Change

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

: Applicable

Item Content CONSULT Set switch Factory setting
Amount of seat sliding for
entry/exit assist		 The amount of seat sliding for entry/exit assist can be selected from 3 items.
[40 mm/80 mm/150 mm]		 x - 40 mm
Entry/exit assist
(seat)		 Entry/exit assist (seat) can be selected:
ON (operated) - OFF (not operated)		 x x ON
Entry/exit assist
(steering column)		 Entry/exit assist (steering column) can be selected:
ON (operated) - OFF (not operated)		 x ON
scientia non olet · About LEMON Manuals