Initialization Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHOOSE METHOD

There are two initialization methods.

Which method do you use?

With door switch

GO TO STEP 2 .

With vehicle speed

GO TO STEP 4 .

STEP A-1

Turn ignition switch from ACC to OFF position.

GO TO STEP 3 .

STEP A-2

Driver door switch is ON (open) → OFF (close) → ON (open).

Inspection End.

STEP B-1

Drive the vehicle at more than 25 km/h (16 MPH).

Inspection End.