LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Sliding Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK SLIDING SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect power seat switch LH.
    3. Check continuity between power seat switch LH terminals.
      Terminal Condition Continuity
      Power seat switch LH
      3 8 Sliding switch (backward) Operate Yes
      Release No
      7 Sliding switch (forward) Operate Yes
      Release No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace power seat switch LH. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals