Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "SLIDE PULSE" in "DATA MONITOR" mode with CONSULT.

Check sliding sensor switch signal under the following conditions.

Monitor item	Condition		Value
SLIDE PULSE	Seat sliding	Operate (forward)	Change (decrease)
		Operate (backward)	Change (increase)
		Release	No change

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .