LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Lifting Switch (Front) >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "DATA MONITOR" mode with CONSULT.
    2. Check lifting switch (front) signal under the following conditions.
      Monitor item Condition Status
      LIFT FR SW-UP Lifting switch front (upward) Operate ON
      Release OFF
      LIFT FR SW-DN Lifting switch front (downward) Operate ON
      Release OFF

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals