LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Door Mirror Motor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK DOOR MIRROR MOTOR-I

    Check that door mirror motor does not trap foreign objects and does not have any damage.

    Refer to EXPLODED VIEW .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Replace door mirror actuator. Refer to REMOVAL AND INSTALLATION .

  2. CHECK DOOR MIRROR MOTOR-II

    1. Turn ignition switch OFF.
    2. Disconnect door mirror.
    3. Apply 12V to each power supply terminal of door mirror motor.
      Door mirror connector Terminal Operational direction
      (+) (+)-)
      D6 (LH)
      D116 (RH)
      (with around view monitor)
      10 11 RIGHT
      11 10 LEFT
      12 10 UP
      10 12 DOWN
      D4 (LH)
      D107 (RH)
      (without around view monitor)
      10 9 RIGHT
      9 10 LEFT
      8 10 UP
      10 8 DOWN

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace door mirror actuator. Refer to REMOVAL AND INSTALLATION .