Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON.
- Check "Self diagnostic result" with CONSULT.
- Erase the DTC.
- Perform DTC confirmation procedure. Refer to DTC LOGIC .
Is the DTC displayed again?
YES
GO TO STEP 2.
NO
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
- REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to REMOVAL AND INSTALLATION .
Inspection End.