Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AWD SOLENOID
- Turn the ignition switch OFF.
- Disconnect AWD solenoid harness connector.
- Check the resistance between AWD solenoid harness connector terminals.
AWD solenoid Resistance (Approx.) Terminal 1 2 2.45 Ω
Is the inspection result normal?
YES
INSPECTION END
NO
AWD solenoid is malfunctioning. Replace electric controlled coupling. Refer to REMOVAL AND INSTALLATION .