LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Transfer Case (DTC/Circuit Diagnosis) (Except Hybrid)) >> DTC/Circuit Diagnosis >> AWD Warning Icon/Display >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK POWER SUPPLY AND GROUND CIRCUIT

    Perform the trouble diagnosis for power supply and ground circuit. Refer to DIAGNOSIS PROCEDURE .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair or replace the error-detected parts.

  2. PERFORM SELF-DIAGNOSIS (AWD CONTROL UNIT)

    G-20With CONSULT 

    Perform self-diagnosis for "ALL MODE AWD/4WD".

    Is any detected?

    YES 

    Check the DTC. Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. PERFORM SELF-DIAGNOSIS (COMBINATION METER)

    G-20With CONSULT 

    Perform self-diagnosis for "METER/M&A".

    Is any detected?

    YES 

    Check the DTC. Refer to DTC INDEX .

    NO 

    Perform the trouble diagnosis for combination meter power supply circuit. Refer to DIAGNOSIS PROCEDURE .