Freeze Frame Data (FFD)
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
| Item name |
Display item |
IGN counter
(0 - 39) |
The number of times that ignition switch is turned ON after the DTC is detected is displayed.
- When "0" is displayed: It indicates that the system is presently malfunctioning.
- When except "0" is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.
NOTE:
Each time when ignition switch is turned OFF to ON, numerical number increases in 1 → 2 → 3...38 → 39. When the operation number of times exceeds 39, the number do not increase and "39" is displayed until self-diagnosis result is erased.
|