Parking Brake Shoe: Adjustment
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- Adjust parking brake pedal stroke. Refer to INSPECTION AND ADJUSTMENT .
- Perform parking brake break-in (drag on) operation by driving vehicle under the following conditions:
- Drive forward
- Vehicle speed: Approx. 40 km/h (25 MPH) set (constant and forward)
- Parking brake operating force: Approx. 160 +49, -0 N (16.3 +5, -0 kg-f, 36.0 +11, -0 lb-f)
- Time: Approx. 5 +5, -0 seconds.
CAUTION:To prevent lining from getting too hot, allow a cool off period of approximately 5 minutes after every break-in operation.
- After the break-in procedure, check parking pedal stroke of parking brake.CAUTION:
If it is out of the specification, adjust again. Refer to INSPECTION AND ADJUSTMENT .