LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Audio, Visual & Navigation System (DTC/Circuit Diagnosis) (BOSE Audio Without Navigation) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Satellite Radio Tuner >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CHECK FUSE

    Check that the following fuses are not blown.

    Terminal No. Signal name Fuse No.
    32 Battery power supply 15 (15A)
    36 ACC power supply 65 (10A)

    Are the fuses blown?

    YES 

    Replace the blown fuse after repairing the affected circuit.

    NO 

    GO TO STEP 2  .

  2. CHECK POWER SUPPLY CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect satellite radio tuner connector B2.
    3. Check voltage between satellite radio tuner connector B2 terminal 32, 36 and ground.
      Satellite radio tuner Ground Condition Voltage
      (Approx.)
      Connector Terminal
      B2 32 - Ignition switch: OFF Battery voltage
      36 Ignition switch: ACC

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace harness or connectors.

  3. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Check continuity between satellite radio tuner connector B2 terminal 35 and ground.
      Satellite radio tuner Ground Continuity
      Connector Terminal
      B2 35 - Yes

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Repair or replace harness or connectors.