LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Audio, Visual & Navigation System (DTC/Circuit Diagnosis) (BOSE Audio Without Navigation) (Except Hybrid) (2 Of 2)) >> DTC/Circuit Diagnosis >> Center Speaker >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CONNECTOR CHECK

    Check the AV control unit, BOSE speaker amp. and speaker connectors for the following:

    • Proper connection
    • Damage
    • Disconnected or loose terminals

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair the terminals or connectors.

  2. CHECK CENTER SPEAKER SIGNAL CIRCUIT CONTINUITY

    1. Disconnect BOSE speaker amp. connector B130 and center speaker connector.
    2. Check continuity between BOSE speaker amp. connector B130 and center speaker connector M110.
      BOSE speaker amp. Center speaker Continuity
      Connector Terminal Connector Terminal
      B130 16 M110 1 Yes
      17 2
    3. Check continuity between BOSE speaker amp. connector B130 and ground.
      BOSE speaker amp. Ground Continuity
      Connector Terminal
      B130 16 - No
      17

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace harness or connectors.

  3. CHECK CENTER SPEAKER SIGNAL

    1. Connect BOSE speaker amp. connector B130 and center speaker connector M110.
    2. Turn ignition switch to ACC.
    3. Push AV control unit POWER switch.
    4. Check signal between terminals of BOSE speaker amp. connector B130.
      BOSE speaker amp. connector B130 Condition Reference value
      (+) (-)
      Terminal Terminal
      16 17 Audio signal output
      G04084885Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    Replace center speaker. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 4. 

  4. CHECK PRE-AMP SIGNAL CIRCUIT CONTINUITY

    1. Disconnect AV control unit connector M197 and BOSE speaker amp. connector B130.
    2. Check continuity between AV control unit connector M197 and BOSE speaker amp. connector B130.
      AV control unit BOSE speaker amp. Continuity
      Connector Terminal Connector Terminal
      M197 113 B130 35 Yes
      119 36
      109 33
      115 34
    3. Check continuity between AV control unit connector M197 and ground.
      AV control unit Ground Continuity
      Connector Terminal
      M197 113 - No
      119
      109
      115

    Is the inspection result normal?

    YES 

    GO TO STEP 5. 

    NO 

    Repair or replace harness or connectors.

  5. CHECK PRE-AMP SIGNAL

    1. Connect AV control unit connector M197 and BOSE speaker amp. connector B130.
    2. Turn ignition switch to ACC.
    3. Push AV control unit POWER switch.
    4. Check signal between the terminals of AV control unit connector M197.
      AV control unit connector M197 Condition Reference value
      (+) (-)
      Terminal Terminal
      113 119 Audio signal output
      G04084885Courtesy of NISSAN NORTH AMERICA, INC.
      109 115

    Is the inspection result normal?

    YES 

    Replace BOSE speaker amp. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace AV control unit. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals