LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Steering System (Except Hybrid)) >> Removal And Installation >> Steering Gear And Linkage >> Removal And Installation - Inner Socket >> Removal

Removal And Installation - Inner Socket: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove boot. Refer to REMOVAL AND INSTALLATION - BOOT .
  2. Remove inner socket.
    GNSALGIA0203ZZ-203Courtesy of
    CAUTION:

    To prevent damage to the rack bar when removing the inner socket, hold suitable tool (A) across rack bar flats (C) while turning suitable tool (B) across inner socket flats (D).

  3. Remove spacer.
scientia non olet · About LEMON Manuals