LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Steering System (Except Hybrid)) >> Removal And Installation >> Steering Gear And Linkage >> Removal And Installation - Boot >> Removal

Removal And Installation - Boot: Removal

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove outer socket. Refer to REMOVAL AND INSTALLATION - OUTER SOCKET .
  2. Remove inner socket lock nut.
  3. Remove the nuts and separate the stabilizer connecting rods from the stabilizer bar. Reposition the stabilizer bar. Refer to REMOVAL AND INSTALLATION .
  4. Remove small boot clamp and large boot clamp.
    CAUTION:

    Do not reuse large boot clamp.

  5. Remove boot.
scientia non olet · About LEMON Manuals