LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Steering System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Tilt & Telescopic Switch Ground Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

  1. CHECK ADP STEERING SWITCH (TILT & TELESCOPIC SWITCH) GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect ADP steering switch (tilt & telescopic switch).
    3. Check continuity between ADP steering switch (tilt & telescopic switch) and ground.
    ADP steering switch (tilt & telescopic switch) Ground Continuity
    Connector Terminal
    M16 3 Yes

    Is the inspection result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals