LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Steering System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Telescopic Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK TELESCOPIC SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect ADP steering switch (telescopic switch).
    3. Check continuity between ADP steering switch terminals.
      ADP steering switch (telescopic switch) Condition Continuity
      Terminal
      3 1 Telescopic switch (forward) Operate Yes
      Release No
      6 Telescopic switch (backward) Operate Yes
      Release No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace ADP steering switch (telescopic switch). Refer to REMOVAL AND INSTALLATION .