LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Steering System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Heated Steering Wheel System >> Component Inspection (Heated Steering Wheel Switch)

Component Inspection (Heated Steering Wheel Switch)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK HEATED STEERING WHEEL SWITCH

    1. Turn ignition switch OFF.
    2. Remove the heated steering wheel switch. Refer to REMOVAL AND INSTALLATION .
    3. Check continuity between heated steering wheel switch terminals.
      Terminal Condition Continuity
      1 2 switch pressed Yes
      switch released No

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Replace heated steering wheel switch.

  2. CHECK HEATED STEERING WHEEL SWITCH INDICATOR LAMP

    Apply 12V direct current between heated steering wheel switch terminals and check that the indicator lamp turns ON.

    Terminals Condition Indicator lamp status
    + -
    5 6 Apply 12V direct current between terminals ON

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace heated steering wheel switch.

scientia non olet · About LEMON Manuals