LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Brake Control System (Symptom Diagnosis & Removal And Installation) (With ICC) (Except Hybrid)) >> Symptom Diagnosis >> Brake Pedal Vibration Or Operation Sound Occurs >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. Symptom check 1

    Check that there are pedal vibrations when the engine is started.

    Do vibrations occur?

    YES 

    GO TO STEP 2  .

    NO 

    Check brake pedal. Refer to INSPECTION .

  2. Symptom check 2

    Check that motor sound from ABS actuator occurs when the engine starts.

    Does the operation sound occur?

    YES 

    GO TO STEP 3  .

    NO 

    Perform self-diagnosis result. Refer to CONSULT FUNCTION .

  3. Symptom check 3

    Check symptoms when electrical component (head lamps, etc.) switches are operated.

    Does the symptom occur?

    YES 

    Check that radio (including wiring), antenna and antenna lead-in wires are not located near ABS actuator and electric unit (control unit). Move them if they are located near ABS actuator and electric unit (control unit).

    NO 

    Inspection End.

scientia non olet · About LEMON Manuals