LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Control System (Introduction) (VQ35DE) (Except Hybrid)) >> System Description >> Component Parts >> Heated Oxygen Sensor 2 >> Heated Oxygen Sensor 2 Heater

Heated Oxygen Sensor 2 Heater

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

Heated oxygen sensor 2 heater is integrated in the sensor.

The ECM performs ON/OFF control of the heated oxygen sensor 2 heater corresponding to the engine speed, amount of intake air and engine coolant temperature.

Engine speed Heated oxygen sensor 2 heater
Above 3, 600 RPM OFF
Below 3, 600 RPM after the following conditions are met.
  • Engine: After warming up
  • Keeping the engine speed between 3, 500 and 4, 000 RPM for 1 minute and at idle for 1 minute under no load
 ON
scientia non olet · About LEMON Manuals