LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Brake Control System (DTC/Circuit Diagnosis) (Without ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK VDC OFF SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect VDC OFF switch connector.
    3. Check continuity between terminals of VDC OFF switch connector.
      VDC OFF switch terminals Condition Continuity
      1 - 2 VDC OFF switch pressed Yes
      VDC OFF switch released No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace VDC OFF switch.

scientia non olet · About LEMON Manuals