Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- DECEL G SENSOR CALIBRATION
Perform decel G sensor calibration. Refer to WORK PROCEDURE .
GO TO STEP 2 .
- CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
With CONSULT
Perform "Self Diagnostic Result" of "ABS".
Is DTC "C1160" detected?
YES
GO TO STEP 3 .
NO
Inspection End.
- CHECK YAW RATE/SIDE/DECEL G SENSOR SYSTEM
- Turn the ignition switch OFF.
- Check the yaw rate/side/decel G sensor system. Refer to WORK PROCEDURE .
Is the inspection result normal?
YES
Replace the ABS actuator and electric unit (control unit). Refer to REMOVAL AND INSTALLATION .
NO
Replace the yaw rate/side/decel G sensor. Refer to REMOVAL AND INSTALLATION .