LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Brake Control System (DTC/Circuit Diagnosis) (Without ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1116: Stop Lamp Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK STOP LAMP SWITCH

    1. Turn the ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check the continuity when stop lamp switch is operated.
      Stop lamp switch Condition Continuity
      Terminal
      2 - 1 When stop lamp switch is released
      (When brake pedal is depressed)      		 Yes
      4 - 3 When stop lamp switch is pressed
      (When brake pedal is released)      		 No

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace the stop lamp switch. Refer to EXPLODED VIEW .

scientia non olet · About LEMON Manuals