LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Brake Control System (DTC/Circuit Diagnosis) (Without ICC) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK BRAKE WARNING LAMP FUNCTION (1)

    Check that brake warning lamp in combination meter turns ON for approximately 2 seconds after ignition switch is turned ON.

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

  2. CHECK BRAKE WARNING LAMP FUNCTION (2)

    Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.

    Is the inspection result normal?

    YES 

    Inspection End. 

    NO 

    Check parking brake switch system. Refer to DIAGNOSIS PROCEDURE .