LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Transfer Case (Except Hybrid)) >> Unit Disassembly And Assembly >> Drive Pinion >> Adjustment >> Backlash

Drive Pinion: Adjustment: Backlash

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bolt to the companion flange.
  2. Fit a dial indicator onto the bolt (A).
    G06935931Courtesy of NISSAN NORTH AMERICA, INC.
  3. Measure the circumference backlash of the companion flange.
    Backlash : Refer to BACKLASH .
    • If outside the standard, disassemble the transfer assembly to check and adjust each part.
scientia non olet · About LEMON Manuals