LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Transfer Case (Except Hybrid)) >> Periodic Maintenance >> Transfer Oil >> Inspection >> Transfer Oil Level

Transfer Oil Level

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do not start engine while checking transfer oil level.

  1. Remove filler plug (1) and gasket.
    GNSALDIA0383ZZ-383Courtesy of NISSAN NORTH AMERICA, INC.
    ARROW : Front
  2. Transfer oil level (A) should be level with bottom of filler plug hole. Add transfer oil if necessary. Refer to FLUIDS AND LUBRICANTS (USA and CANADA) .
  3. Set a new gasket onto filler plug, and install it in the transfer and tighten to specified torque. Refer to EXPLODED VIEW .
    CAUTION:

    Do not reuse gasket.

scientia non olet · About LEMON Manuals