LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Front Axle (Except Hybrid)) >> Unit Disassembly And Assembly >> Front Drive Shaft >> Disassembly And Assembly (RH) >> Disassembly >> Support Bearing

Support Bearing

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dust shield from slide joint assembly using a suitable tool.
  2. Remove snap ring (A) using a suitable tool.
  3. Press support bearing assembly off slide joint assembly using a suitable tool.
    G08688930Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals