LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Front Axle (Except Hybrid)) >> Unit Disassembly And Assembly >> Front Drive Shaft >> Disassembly And Assembly (RH) >> Assembly >> Damper (If Equipped)

Damper (If Equipped)

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use new damper bands for installation.
    G04161825Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Do not reuse damper bands.

  2. Install damper from stationary-joint side while holding it securely.
    Dimension (A) : Refer to DYNAMIC DAMPER .
    Dimension (B) : Refer to DYNAMIC DAMPER .
scientia non olet · About LEMON Manuals