LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Driver Assistance System (DTC/Circuit Diagnosis) (BCI) (Except Hybrid)) >> DTC/Circuit Diagnosis >> Meter Control Switch Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK BCI SYSTEM SWITCH INPUT SIGNAL

    1. Turn the ignition switch ON.
    2. Select the DATA MONITOR item "BCI SYS SW" of "ICC/ADAS" with CONSULT.
    3. With operating the warning systems switch, check the monitor status.
    Monitor item Condition Monitor status
    BCI SW BCI switch is pressed On
    BCI switch is not pressed OFF

    Is the inspection result normal?

    YES 

    Warning systems switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals