LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Driver Assistance System (DTC/Circuit Diagnosis) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Side Radar RH >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK SELF-DIAGNOSIS RESULT

    1. Turn the Blind Spot Intervention system ON.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR RIGHT".

    Is "U1010" detected as the current malfunction?

    YES 

    Replace the side radar RH. Refer to REMOVAL AND INSTALLATION .

    NO 

    INSPECTION END