LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Driver Assistance System (DTC/Circuit Diagnosis) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> Side Radar LH >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM THE SELF-DIAGNOSIS

    1. Start the engine.
    2. Turn the Blind Spot Intervention system ON, and then wait for 30 seconds or more.
    3. Perform "All DTC Reading" with CONSULT.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR LEFT".

    Is "U1000" detected as the current malfunction?

    YES 

    Refer to TROUBLE DIAGNOSIS FLOW CHART .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals