LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Driver Assistance System (DTC/Circuit Diagnosis) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1A24: NP Range >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
DTC
(On board display)
Trouble diagnosis name DTC detecting condition Possible causes
C1A24
(24)
NP RANGE A mismatch between a shift position signal transmitted from TCM via CAN communication and a current gear position signal continues for 60 seconds or more
  • TCM
  • Transmission range switch
NOTE:

If DTC "C1A24" is detected along with DTC "U1000", first diagnose the DTC "U1000". Refer to DTC LOGIC .