LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Driver Assistance System (DTC/Circuit Diagnosis) (DCA) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC C1F03: Accelerator Pedal Actuator >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn the ignition switch OFF.
    2. Wait for 10 minutes or more and cool the accelerator pedal actuator integrated motor.
    3. Drive the vehicle with DCA system ON and operate the system.
      CAUTION:

      Always drive safely.

    4. Stop the vehicle.
    5. Perform "All DTC Reading" with CONSULT.
    6. Check if the DTC "C1F03" is detected as the current malfunction in self-diagnosis results of "ACCELE PEDAL ACT".

    Is "C1F03" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO 

    Refer to INTERMITTENT INCIDENT .

scientia non olet · About LEMON Manuals