LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX60 Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Driver Assistance System (DTC/Circuit Diagnosis) (ADAS Control Unit) (Except Hybrid)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn the MAIN switch of ICC system ON.
    2. Perform "All DTC Reading" with CONSULT.
    3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

    Is "U1010" detected as the current malfunction?

    YES 

    Replace the ADAS control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals